Finally, was able to
install cabin air filter in my Brio. Even though we do not have any Brio
specific Cabin Air filter not available. I decided to go with the closest
available filter which fits the filter housing which is almost measuring
21cmX20cmX2.8cm
I've purchased this
from Amazon.in which is made for Swift/Dezire/SX4. However, this is not the
best fit filter. I could see two mm gap around the filter.
Things Needed:
- Cabin Air Filter (21cmX20CMX2.8CM)
- Heavy duty Cutter (please handle with care)
- Wide Masking Tape (avoid any other sticky film so that it will help in replacing these airlifter).
How to install:
- Open the glove-box lid. Gently press the both the sides of top lid to de-latch top part of the glove box from dash.
- Pull the glove-box lid gently towards you to completely detach from the dash.
- Identify the grove line around the filter box as highlighted in the RED rectangle.
- This grove line will help as guideline to cut open the plastic narrow strip.
- Use the Heavy duty cutter (just slide open two mm blade) to cut the plastic panel.
- Gently insert along the groovy line until the right hand top and bottom corner. Please take care of your finger being accidentally cut.
- Do Not cut the right most side of the plastic strip as this helps in holding this piece in place.
- Gently pull open once this strip is cut open on all the three sides (top, bottom and left hand side).
- Insert the air filter. As shown in the image
- Close the plastic strip and stick the masking tape
- Replace the glove box in reverse order how you pulled out
#Honda
#Brio #HondaBrio #AirFilter #CabinAirFilter #Air-Filter #DIY #Amzon.in #Purolator #mahle
No comments:
Post a Comment